Apple updates AirPort Express firmware with AirPlay 2 support

Apple updates AirPort Express firmware with AirPlay 2 support
Surprise, the AirPort Express isn’t dead! While Apple stopped selling AirPort products back in April, the company is still updating the firmware of the once beloved AirPort Express.
This firmware update is quite significant as it adds support for AirPlay 2 and the Home app. In other words, you can now plug speakers to a dusty AirPort Express and turn them into wireless speakers for your home sound system.
The AirPort Express was a pretty basic home router. It hasn’t been updated since 2012, which means that it’s nowhere near as performant as today’s cheap routers. It only supports 802.11n while everybody has moved on to 802.11ac.
Its Ethernet ports are limited to 100 Mbps. So if you have fiber internet, the AirPort Express is not a good solution as it caps your internet connection to 100 Mbps.
But the AirPort Express also has an audio jack — something that you can’t find in many Apple products these days. Today’s update makes this audio jack relevant again, as it’s a cheap way to get started with AirPlay 2.
After updating the device with the AirPort Utility app on your Mac or iOS device, you can launch the Home app and add the router as a new Home accessory. After that, you’ll find the AirPort Express in your AirPlay speaker list.
Apple recently released AirPlay 2, an update to its audio and video protocol. With AirPlay 2, you can stream music from your Apple devices to multiple speakers at once. On your phone, you can control the volume of each speaker individually and play the same song across your home.
While Sonos, Bose and other speaker manufacturers are updating their devices to support AirPlay 2, chances are many devices won’t get an update. The AirPort Express update can help you go through this transition.

Source: Gadgets – techcrunch

The Velop AC3900 mesh router offers cheaper whole-home Internet

The Velop AC3900 mesh router offers cheaper whole-home Internet
The whole-home wireless craze peaked and waned last year with the rise of Orbi, Eero, Google WiFi, and Linksys’ Velop. These routers use mesh technology to blanket your home in soft, velvety Wi-Fi, ensuring that everything from the front camera/lamp to the Wi-Fi-connected grill in the back yard are connected to the Internet. I’ve tested a number of these so far and have settled on Orbi as the best of the bunch but the original tri-band Velop was excellent and this dual-band model – a cheaper but still speedy whole home solution – has maintained quality and value and holds the crown for the cheapest – and best – mesh network you can buy.
This new mesh kit, the Velop AC3900, costs $299 and is slightly smaller than the original AC4400, a tri-band solution that started at $349 for three units. Considering most routers hover around the $100 mark with some falling as low as $20, it was a hard sell and the story manufacturers told – your Wi-Fi was insufficient for your home and you needed multiple little routers instead of one in the living room – didn’t quite resonate. Linksys reacted to this by releasing this smaller, cheaper model onto a single-router world.
The result is the AC3900, a shorter, smaller device that can hide in your home (as long as its near an electrical outlet) or sit out as a high-design techno-tchotchke. The Velop can blanket up to 4,500 square feet and even act as a wired router for standalone devices. Setup is as easy as pulling a single unit out of the box and connecting to it while running the Linksys app. You can then add more units throughout the home.
The AC3900 devices are a few inches shorter than the AC4400 and they are missing a few of the high-end bells and whistles of the original models. First, these routers have less memory than the original models, with system memory halving from the original 512MB down to 256MB and internal Flash memory falling from 4GB to 256MB. The router also supports only two simultaneous bands while the original model supported three simultaneous bands. In practice I saw solid performance out of both models with the AC3900 maxing out at about 900Mbps internal network speeds which equates to some excellent Internet speeds when the entire system is working. Interestingly, you can also ask your voice assistants to turn on or off Velop’s guest network, a cute feature for when visitors come over.
The real question most people have regarding these whole home solutions is whether they work and whether they’re worth it. Most of them, except for a few exceptions I discovered in my trials, work very, very well. Velop is easy to set up – you just place it in a room and press a button – and once it’s installed you’ll throw away all of your other routers. For years I placed a single router in my living room and used some Apple Airports and wireline networking to connect things up to my attic. Now with mesh networking I get a solid signal throughout the house and even in the back yard.
The AC3900 comes with three units and costs the same as Linksys’ dual-unit AC4400. While the AC4400 are ostensibly better I would argue that the AC3900 is about the same and the added benefit of an extra unit makes the whole-home Internet even more widespread. Mesh routers are the way to go and this is a great way to try them out.
The only thing you really need to know about these units is that they work. Whether you’re dropping a bunch of Netgear Orbis around your house or starting up a Google Wifi unit, mesh networks make your wireless experience much better. Linksys, to their credit, just made that experience a little cheaper.

Source: Gadgets – techcrunch